Model No: LS-PFL-100/200/400/720
Why should we use LED lights for school? At present, there are more and more children with nearsightedness. Many parents think that the vision caused by children sitting problems has been reduced by having the proper school lighting, for classroom, corridor, sports playground, hall or other facilities. In fact, it is understood that the impractical lighting environment in classrooms will seriously affect children’s eyesight. To solve this need, we manufacture the best lamps for high school and college to protect eyesight and improve comfort of teachers and students psychologically. To save energy, metal halide, halogen, HPS or fluorescent replacement with LED is highly recommended for library, football field and running track that requires high mast lighting.
Benefits of using LED lamps for school
There are countless advantages if you convert the metal halide, halogen and fluorescent lighting with LED. Before doing the replacement, we can have a look at the following incentives.
1. Energy saving and environmental protection
The difference between LED lighting and conventional HID lamps is energy saving and environmental protection. Traditional fluorescent tubes contain large amounts of mercury vapor. Once broken, mercury vapors are released into the atmosphere and cause pollution. The company’s LED lamp does not use mercury at all, and LED products do not contain lead, mercury and other harmful substances, and can be recycled. Besides, LED has 30% higher luminous efficiency than fluorescent tube, which means under the same power consumption, LED school lighting is brighter.
2. Safe and reliable
Our LED is a safer lighting solution for school facilities because it does not have brittle glass and outer shell. It is a much better choice because of its water proof design, which is very useful for high mast football pitch lighting for high schools. To reduce the maintenance and replacement cost as metal halide and fluorescent tube have, LED lighting has 80000 hours life cycle at L70. It means the lumen loss per year is less than 1% per year.
3. No mosquito troubles
The LED flood lamps will not produce ultraviolet radiation and infrared radiation which contributes to thermal effect. Therefore, mosquitoes will not be attracted to our lights. Indoor hygiene and overall compliance will be improved.
4. Protect the eyes
The soft LED school lights are relatively not dazzling which is paramount to relieve the fatigue. It creates a good learning environment for students and teachers, and hence improves learning efficiency. Traditional fluorescent lamps use alternating current, so they produce 100-120 observable strobes per second. On the contrary, LED lamps mainly use DC to produce non-flickering illumination.
5. Wide voltage range
The traditional fluorescent and metal halide lamp cannot function normally when the working voltage does not fall within a narrow region; nonetheless, the LED lamp can be lighted within a range of AC voltage 95-265V, which is suitable for almost all kinds of classrooms.
6. Easy to replace
The size of LED lamp is very similar to the conventional lighting such as HID, halogen and fluorescent. After retrofitting the classroom lights with LED, the ballast can be eliminated and thus the convenience is enhanced.
In addition to classroom lighting, outdoor LED corridors, playground sports field LED lighting is also the important facilities for schools. In school corridors, sometime only relying on sunlight might be the best way to achieve proper lighting; instead we need the LED supplementary lighting.
How the question is how to arrange the corridor lamps?
Corridor lighting generally uses wall or downlights. When the school corridor is long, do not install the lamps at equal distances. You should install them near the entrance of the class to make the class more visible. It is also necessary to consider the situation of going to the bathroom late at night.
Lighting for schools’ football field, basketball court, and other spacious sports venues
We need to consider the below issues for large area outdoor lighting. The first one is that the waterproof IP rating, another one is lumen output. To withstand the inclement weather, the outdoor high mast school lighting should have at least IP65 or IP66 rating. To offer the adequate brightness and satisfy the lighting requirement, we need thousands of lumens. The actual lumen required depends on the size of college football field, height of pole and weight limitation. It is advised to use DIALux simulation software to predict the lumen output of the luminaries in advanced to guarantee the best lighting for school lighting project. Good school and classroom lighting can assist the student’s happy growth.
Our contact email: beatus@ledsmaster.com